ASUS Prime AMD Radeon RX 9070 XT OC Edition 16GB GDDR6 Graphics Card - 90YV0L71-M0NA00

ASUS Prime AMD Radeon RX 9070 XT OC Edition 16GB GDDR6 Graphics Card - 90YV0L71-M0NA00

The ASUS Prime Radeon RX 9070 XT OC Edition is a factory-overclocked 16GB graphics card built on AMD's RDNA 4 architecture, boosting to 3030 MHz in OC mode. Its 4096 stream processors and 16GB of GDDR6 running at 20 Gbps across a 256-bit bus deliver 640 GB/s of bandwidth for high-refresh 1440p and 4K gaming. A triple-fan Axial-tech cooler with a 2.5-slot design and Phase-Change GPU thermal pad keeps it running cool and quiet under sustained load.

RDNA 4 Architecture and Factory Overclock

RDNA 4 brings a substantial generational uplift, particularly in ray tracing and AI workloads where previous Radeon generations lagged behind. The RX 9070 XT packs 4096 stream processors, 128 AI accelerators and 64 ray tracing cores onto a 4nm Navi 48 die, and this Prime model ships factory overclocked to 3030 MHz boost in OC mode, up from the 3010 MHz default. Game clock runs to 2480 MHz in OC mode, which is the figure that matters most for sustained real-world frame rates. Support for AMD FidelityFX Super Resolution and HYPR-RX lifts performance further in supported titles.

16GB GDDR6 and PCIe 5.0

16GB of GDDR6 is a genuinely useful amount at this tier, giving headroom for 4K textures, ray tracing buffers and memory-hungry titles that increasingly push past 12GB. Running at 20 Gbps across a 256-bit interface, the card has 640 GB/s of memory bandwidth to feed those 4096 stream processors. PCI Express 5.0 connectivity keeps it ready for current and future platforms, and display output covers three DisplayPort 2.1a and one HDMI 2.1b, driving up to four screens at resolutions as high as 8K.

Axial-tech Triple-Fan Cooling

Cooling comes from three Axial-tech fans in a 2.5-slot shroud, with the centre fan spinning counter-rotationally to reduce turbulence between the fan blades. A Phase-Change GPU thermal pad replaces conventional paste and is rated to maintain consistent thermal transfer for up to five years, avoiding the pump-out degradation that affects paste over time. Dual ball fan bearings extend service life considerably over sleeve bearings, and 0dB technology stops the fans entirely below around 50 degrees so the card is silent at the desktop. A protective backplate with a large vent lets hot air exhaust directly rather than recirculating.

Understated Prime Design

The Prime series takes a deliberately understated approach, with a clean matte finish and no RGB lighting, which makes it a natural fit for builds where the graphics card should not dominate visually. Auto-Extreme manufacturing and a steel-reinforced bracket improve durability and resist the sag that affects heavy triple-fan cards. Power is supplied via two 8-pin connectors, and ASUS GPU Tweak III provides monitoring, fan curve control and one-click overclocking.

Specifications

General

Graphics Card