KLEVV FIT V DDR5 32GB (2x 16GB) 6000MHz CL28 Gaming Memory RAM Kit - White - KD5AGU880-60B280F

The KLEVV FIT V is a 32GB dual-channel DDR5 kit running at 6000MHz with tight CL28 timings, built on SK Hynix A-Die. At just 33.2mm tall it is one of the lowest-profile performance kits available, clearing large tower coolers that force taller kits into awkward compromises. Intel XMP 3.0 and AMD EXPO profiles are pre-programmed for one-click setup on either platform.
£394.99 £329.16
SKU
KLE-002-KIT
ADD TO COMPARE
Out of stock

Features

General

SKU KLE-002-KIT

Features

Brand KLEVV
Model Number KD5AGU880-60B280F
Memory Type DDR5
Total Memory Capacity 32GB
Capacity Per Module 16GB
Memory Speed 6000MHz
Colour White

Description

KLEVV FIT V DDR5 32GB (2x 16GB) 6000MHz CL28 Gaming Memory RAM Kit - White - KD5AGU880-60B280F

The KLEVV FIT V is a 32GB dual-channel DDR5 kit running at 6000MHz with tight CL28 timings, built on SK Hynix A-Die. At just 33.2mm tall it is one of the lowest-profile performance kits available, clearing large tower coolers that force taller kits into awkward compromises. Intel XMP 3.0 and AMD EXPO profiles are pre-programmed for one-click setup on either platform.

DDR5-6000 CL28: Tighter Than the Standard

DDR5-6000 with CL28 timings is an unusually tight combination and a genuine step beyond the CL30 kits that dominate this speed. Frequency alone only tells half the story: latency is what determines how quickly the memory responds to a request, and dropping from CL30 to CL28 shortens that at the same clock speed. On AMD's AM5 platform 6000MT/s also aligns with the optimal Infinity Fabric ratio, making this pairing about as well matched as DDR5 gets for gaming. Full timings are 28-36-36-76.

SK Hynix A-Die

The modules use SK Hynix A-Die, which matters more than most spec-sheet entries. KLEVV is a brand of Essencore, an SK Hynix affiliate, so it has direct access to the ICs rather than buying them on the open market. A-Die is the die memory overclockers actively seek out for its headroom and consistency, so there is real scope to tune beyond the rated profile. On-die ECC and an onboard PMIC handle data integrity and power delivery at module level, both DDR5 improvements over DDR4.

33.2mm Low Profile for Cooler Clearance

At 33.2mm the low-profile aluminium heat spreader is the FIT V's defining practical advantage. Tall heat spreaders routinely foul large air coolers, forcing you to raise a fan, reposition it, or leave the first DIMM slot empty entirely. This kit sidesteps that, making it a safer choice for builds with a big tower cooler or a compact case where clearance is tight. There is no RGB lighting, which keeps the profile low and suits builds where the memory should stay understated.

XMP 3.0 and AMD EXPO Ready

Both Intel XMP 3.0 and AMD EXPO profiles are pre-programmed onto the modules, so reaching the rated 6000MHz CL28 means enabling a profile in the BIOS rather than tuning timings by hand. The kit is QVL tested with the major motherboard manufacturers for compatibility. KLEVV backs the range with a limited lifetime warranty.

Specifications

General

BrandKLEVV
SeriesFIT V
ModelFIT V DDR5 32GB Kit
MPNKD5AGU880-60B280F
ColourWhite

Memory

Capacity32GB (2 x 16GB)
Memory TypeDDR5
Speed6000MHz (PC5-48000)
CAS LatencyCL28
Timings28-36-36-76
Voltage1.35V
KitDual Channel
ICsSK Hynix A-Die
Form Factor288-Pin DIMM
Module Height33.2mm
LightingNone
Heat SpreaderAluminium
OverclockingIntel XMP 3.0 & AMD EXPO
ECCOn-Die ECC (Non-ECC Unbuffered)
PowerOnboard PMIC
ColourWhite

Reviews