Kolink Inspire Series K8 ARGB MIDI ATX Case - Black Window

Cube design front panel with a multi-angled ARGB strip finish

Pre-installed rear 120mm fan with digitally addressable RGB lighting

Option to sync to motherboard software provided as standard

Tempered glass side panel for unobstructed view of the interior

Designed for ATX/Micro-ATX-/Mini-ITX motherboards

Support for radiators up to 240mm in the front & 120mm at the rear

I/O Panel with 1x USB3.0 & 2x USB2.0, HD Audio & RGB button

Graphics cards up to 300mm supported, CPU coolers up to 155mm, PSUs up to 180 mm

KOLINK INSPIRE K8: ARGB ENABLED

The Kolink Inspire K8 features an angled front ARGB strip, along with a rear 120mm ARGB fan, controlled by the I/O panel RGB button or via connection to your motherboards 3-Pin 5VDG connector using the applicable software. The front panel also features a cube effect finish for a distinct look. Users are also free to install up to a 240mm radiator in the front and a 120mm at the rear.

Aside from the pre-installed fans, users are also free to install three 120mm fans on the front panel, plus two 120mm fans in the roof. A full tempered glass side panel shows off your system build in style.

THE KOLINK INSPIRE K8: ROOM FOR HARDWARE

The interior comes entirely in black, with a PSU shroud that only adds to the sleek and unobtrusive look. Behind the shroud is where users will find space for a pair of 3.5" HDDs, using a 'drop and lock' system to secure. Alternatively, 2.5" SSDs can be installed here, directly on top of the PSU shroud or next to the motherboard. Underneath the case is a removable dust filter suitable for an ATX PSU up to 180mm.

Graphics cards can be up to 30cm long and CPU coolers up to 15.5cm tall. Additionally, the I/O panel located at the front possesses two USB2.0 ports as well as a USB3.0 Type-A port.