Kolink Unity Solar ARGB Mesh Midi-Tower Tempered Glass PC Gaming Case - White

Kolink Unity Solar ARGB Mesh Midi-Tower Tempered Glass PC Gaming Case - White

The Kolink Unity Solar ARGB is a mid-tower gaming case in white, combining an ultra-fine performance mesh front with a half tempered glass side panel to show off your build. Four ARGB PWM 120mm fans come pre-installed with a built-in controller, delivering strong airflow and vibrant lighting straight out of the box. Generous clearances support E-ATX motherboards, 400mm graphics cards and radiators up to 360mm.

Comprehensive Hardware Support

Despite its mid-tower footprint, the Unity Solar offers genuinely extensive hardware support, accommodating motherboards up to E-ATX across seven expansion slots. Graphics cards up to 400mm long fit comfortably, covering virtually every card on the market today, and vertical GPU mounting is possible with an optional bracket. A dedicated PSU shroud hides cabling and supports ATX power supplies up to 220mm long.

Four ARGB Fans and Mesh Airflow

Cooling is a core strength, with four ARGB PWM 120mm fans pre-installed from the factory: three in the front and one at the rear. The ultra-fine mesh front panel balances high airflow with effective dust filtration, letting the fans draw in plenty of cool air while keeping the interior clean. Both the front and top panels take three 120mm or two 140mm fans, or radiators up to 360mm, with 162mm of CPU cooler clearance available.

Tempered Glass and Lighting Control

The half tempered glass side panel gives a clear view of your components while the mesh front lets the ARGB lighting glow through, and the crisp white finish makes an ideal backdrop for RGB hardware. Lighting is controlled either by the dedicated ARGB mode and colour buttons on the front I/O, or through your motherboard's 5V ARGB header and software. The front panel also provides two USB 3.0 ports and an HD audio jack.

Storage and Cable Management

Storage is handled by four included drive brackets: two tool-free mounts for 3.5-inch hard drives and two for 2.5-inch SSDs, with three possible SSD mounting locations for flexible layouts. Cable routing cutouts and tie-down points behind the motherboard tray help keep the build tidy and airflow unobstructed. At around 6.7kg the chassis is sturdy without being unwieldy to work in.

Specifications

General

Case