MSI MPG VIXTA 300R PZ ATX Mid Tower Case - Curved Tempered Glass Front, 3 x ARGB Fans - Black - MPG VIXTA 300R PZ

MSI MPG VIXTA 300R PZ ATX Mid Tower Case - Curved Tempered Glass Front, 3 x ARGB Fans - Black - MPG VIXTA 300R PZ

The MSI MPG VIXTA 300R PZ is an ATX mid tower with a floating base design that opens 75mm of intake space beneath the chassis. This version uses a seamless L-shaped curved tempered glass front, moving the intake fans to the side of the case for an unbroken glass look. Project Zero support covers back-connect motherboards alongside standard ATX, Micro-ATX and Mini-ITX. Finished in black.

Seamless Curved Glass Front

This version leads with appearance: a single-piece L-shaped curved tempered glass panel wrapping the front and side with no mesh breaking it up. Because the front is glass, the intake fans move to the side of the case, so air comes in from the side and bottom rather than straight through the front. MSI's EZ-detach system with safety latches and a slideway makes removing that curved panel straightforward rather than the nervous two-handed operation large glass panels usually are.

Floating Base Design

The floating base is what gives the VIXTA its look and a genuine thermal purpose. Raising the chassis creates 75mm of open intake space underneath, so bottom-mounted fans draw completely unobstructed air rather than fighting a carpet or a few millimetres of clearance. MSI also treats that space as display area, intended for figures or desk items, which turns an airflow decision into a design feature.

Project Zero Back-Connect Support

The PZ suffix denotes Project Zero support, meaning the case accepts back-connect motherboards where all the connectors sit on the rear of the board. Routing every cable behind the motherboard tray produces an interior with essentially no visible wiring, which matters far more on a case designed to be looked at. Standard ATX, Micro-ATX and Mini-ITX boards fit too, so the case does not lock you into back-connect hardware.

EZ DIY Building Features

MSI's EZ DIY features are the practical half of the design: tool-free top and side panels that pull off and snap back in seconds, a magnetic snap-and-lock PSU cover, and 35mm of cable routing space behind the tray with a 1-to-4 ARGB and PWM control board so the pre-installed fans connect to a single header. An adjustable GPU holder comes pre-installed, which takes the weight of a heavy card off the PCIe slot and prevents the sag that causes connection problems over time. Front I/O includes a USB 20Gbps Type-C port.

Specifications

General

Case