Skip to the beginning of the images gallery

Phanteks D30 Reverse Airflow 140mm DRGB PWM Triple Fan Pack - Black - PH-F140D30R_DRGB_PWM_BK01_3P

Get three Phanteks D30-140 Reverse Airflow fans in a single bundle, purpose-built for intake arrays, push-pull radiator configurations, and full-case cooling setups where reversed airflow is essential. Each fan delivers 71.76 CFM through a 30mm-thick seven-blade FDB-bearing frame with 30-LED DRGB illumination, PWM speed control from 250 to 1800 RPM, and daisy-chain fan and RGB linking to keep cable runs minimal across all three.

Free Delivery Available

£79.99 £66.66

SKU

01B-7FC-7C5

ADD TO COMPARE

In stock

Features

Description

Specification

Reviews

Features

General

SKU	01B-7FC-7C5

Features

Brand	Phanteks
Model Number	PH-F140D30R_DRGB_PWM_BK01_3P
Colour	Black
Key Features	Triple pack of D30-140 Reverse Airflow fans providing a complete solution for intake arrays, push-pull radiator setups, and multi-fan cooling configurations in a single purchase. Reverse airflow blade orientation on each fan makes the pack ideal for builds where standard fan orientation would be counterproductive, without sacrificing airflow or pressure performance. Each fan delivers up to 71.76 CFM airflow and 3.08 mm H2O static pressure through a 30mm-thick seven-blade frame, maintaining effective performance behind mesh panels and radiators. FDB (Fluid Dynamic Bearing) on every unit ensures smooth, low-friction operation rated for 50,000 hours at 40°C for reliable long-term cooling performance. PWM speed control on each fan spans 250 to 1800 RPM (±10%), with 4-pin daisy-chain connectors allowing all three fans to be linked from a single motherboard header. Thirty individually addressable DRGB LEDs per fan with 3-pin JST daisy-chain RGB linking provide consistent, synchronised lighting across the entire pack from one header connection. Compatible with ARGB and DRGB motherboard headers and Phanteks Digital-RGB products straight out of the box with the included D-RGB motherboard adaptor. Comprehensive hardware kit included for all three fans covering fan screws, UNC 6-32 and M4 radiator screws, corner clips, bridge clip connectors, screw covers, and a D-RGB motherboard adaptor.

Description

Phanteks D30-140 Reverse Airflow 140mm DRGB PWM Case Fan – Triple Pack – Black

The Phanteks D30-140 Reverse Airflow Triple Pack delivers three reverse-blade D30 fans in one bundle — a complete solution for push-pull radiator builds, intake arrays, and full-case cooling configurations where reversed airflow is a requirement rather than a compromise.

Three Fans, One Clean Setup

Each D30-140R pushes up to 71.76 CFM at 3.08 mm H2O of static pressure through a 30mm-thick seven-blade rotor, keeping airflow effective even behind dense mesh panels and radiator fins. Fluid Dynamic Bearings on all three units ensure smooth, low-friction operation across the full 250–1800 RPM PWM range, with a 50,000-hour MTBF rating per fan underlining long-term reliability. All three fans share the same 4-pin PWM daisy-chain system, allowing the full pack to be controlled from a single motherboard header with minimal cable routing.

Synchronised DRGB Across All Three

Thirty individually addressable DRGB LEDs on each fan link via 3-pin JST daisy-chain connectors, delivering synchronised lighting across the full triple pack from a single RGB header — compatible with ARGB and DRGB motherboards and Phanteks Digital-RGB products. A full hardware kit for all three fans is included: fan screws, UNC 6-32 and M4 radiator screws, corner clips, bridge clip connectors, screw covers, and a D-RGB motherboard adaptor, so every fan is ready to install cleanly from the start.

Specification

Specifications

General

Model: PH-F140D30R_DRGB_PWM_BK01_3P
Brand: Phanteks
Series: D30
Colour: Black
Airflow Direction: Reverse
Pack Contents: 3 x Fans
Warranty: 3 Years

Fan (Per Unit)

Fan Size: 140 x 140 x 30mm
Blade Count: 7
Bearing Type: FDB (Fluid Dynamic Bearing)
Speed: 250–1800 RPM (±10%)
Max Airflow: 71.76 CFM
Max Static Pressure: 3.08 mm H2O
Noise Level: 32.1 dBA
Power Consumption: ≤1.8W
Rated Current: 0.15A
Operating Voltage: DC 5–13.2V
MTBF: 50,000 Hours at 40°C

Connectivity (Per Unit)

Fan Connector: 4-Pin PWM (Daisy-Chain)
Fan Cable Length: 700mm
D-RGB Connector: 3-Pin JST (Daisy-Chain)
D-RGB Cable Length: 600mm + 100mm

Lighting (Per Unit)

LED Type: D-RGB (Addressable)
LED Count: 30
LED Voltage: DC 5V (+5V/D/GND)
LED Max Current: 0.45A
Compatible: ARGB / DRGB Motherboard Headers, Phanteks Digital-RGB

In The Box

3 x D30-140 Reverse Fans
1 x D-RGB Motherboard Adaptor
12 x Fan Screws
12 x UNC 6-32 Radiator Screws (36mm)
12 x M4 Radiator Screws (36mm)
2 x Corner Clip Cables
6 x Corner Clips
2 x Bridge Clip Connectors
2 x Bridge Clips
8 x Screw Cover Corners (4L, 4R)
4 x Screw Cover Bridge