Phanteks Eclipse P600S Silent ATX Midi Tower PC Case - Black

1 item(s)
Phanteks Eclipse P600S Silent ATX Midi Tower Gaming PC Case - Black

(£114.99 ex VAT)

The Eclipse P600S is designed to bring you the best of two worlds. A hybrid forged between silent and high-performance chassis.


Phanteks Eclipse P600S Silent ATX Midi Tower PC Case - Black

The innovative design of the P600S from Phanteks will appeal to PC enthusiasts without a doubt, with its stylish exterior and ingenious design. Drawing inspiration from PHANTEKS' other famous case, the Evolv X, the P600S allows for a second Mini-ITX board to be installed in addition to the primary E-ATX motherboard, thereby enabling the case to support dual systems, perfect for an extra dedicated streaming system or server. In addition to the insulation, the P600S also offers optimised airflow and is packed with desirable features like the tempered glass side panel. As we have come to expect from PHANTEKS, the case boasts excellent build quality.

- Superbly designed and crafted Midi-Tower supporting motherboards up to E-ATX
- Supports a dual-system with the help of an optional bracket
- Side doors for easy access
- Integrated insulating material, removable for improved airflow if preferred
- 3x 140 mm fans pre-installed, total of 6x 140 mm and 7x 120 mm fans possible
- Radiators up to 420 mm compatible
- Supports GPUs up to 435 mm long, vertical installation optional, CPU coolers up to 190 mm
- 4x 3,5- and 3x 2,5" slots, up to 10x 3,5 slots available
- I/O Panel with 1x USB 3.1 Type C- and 2x USB 3.0 Type A

Dimensions: 240 x 520 x 510 mm (W x H x D)
Weight: approx. 13,5 kg
Material: Steel
Colour: Black
Form factor: E-ATX (up to 280 mm wide), ATX, Micro-ATX, Mini-ITX
Total possible fans:
3x 140/120 mm (front)
2x 140 / 3x 120 mm (roof)
1x 140/120 mm (rear)
2× 140 mm (front)
1× 140 mm (rear)
Radiator Mountings (forfeits HDD- and/or fan slots):
1x max. 420/360 mm (front)
1x max. 140/120 mm (rear)
1x max. 280/360 mm (roof)
Filter: Front, PSU (removable)
Drive bays:
4x 3.5" (internal; uncoupled; + 6x optional via separately available HDD bracket)
3x 2.5" (internal)
PSU: 1x Standard ATX (optional)
Expansion slots: 7
1x USB 3.1 Type C
2x USB 3.0
1x Audio In/Out
Max GPU length: 435 mm
Max CPU cooler height: 190 mm
Max front rad thickness + fan: 95 mm
Maximum thickness of top radiator + fan: 65 mm
3x 140 mm fans (pre-installed)
1x Fan hub (pre-installed)
4x Hard drive brackets, stackable
1x Vertical GPU bracket
1x Box of screws


Model Number:
5 Years
  • Black


USB 3.0:
USB Type-C:

Choose the P600s over the S2 meshify for custom loop cooling on new setup. Preferred this over the S2 because of 3 x140mm fans at front instead of top.

The case has some limitations regarding the radiator size that can be used. All are clearly detailed in the Manual ( available to view before you buy) the S2 was quite weak in this respect.

My build went well, with everything dropping into place easily and good cable management was possible.

The negatives were with the Quality of the case, with the solid metal doors being rather distorted at the rear. so there are big gaps above, below and between the hinges on both sides . Luckily it is not at all obvious from the front or side view, only from the back.
If you are looking to have a good seal around the doors, then you may be out of luck. I suspect the Glass door versions will be good and straight.
My other issue with quality is the rear panel which seems to have issues with threads. I am having difficulty to fit the correct screws into position due to bad threading. They do go in but not without a fight to get started and are stiff once underway.
Write a review